GE Silicone 2*+ Kitchen & Bath Sealant

summary

  • 100% waterproof and 30-minute water-ready
  • 10- year mold-free product protection
  • Low odor and low VOC (meets CARB VOC limits)
  • Excellent adhesion, will not discolor high-end metal finishes such as chrome, bronze and nickel

colors

Silicone 2+ Kitchen & Bath sealant is 100% silicone and 100% waterproof with 10-year mold-free product protection. Ready for water exposure in as little as 30 minutes, it is formulated for sealing sinks, tubs, showers, fixtures, countertops, backsplashes and plumbing projects. Providing excellent adhesion and a smooth application, it is permanently flexible, low in odor and will not discolor most metals and stones. Guaranteed for as long as you own your home.

Typical Uses: Showers, tubs, sinks, tile, countertops, fixtures, and other plumbing applications

Adheres to: Common kitchen and bath materials including most metals, plastics and woods, glass, drywall, plaster, granite, cultured marble, ceramic and porcelain tile, natural stone, cement board, composites, formica, fiberglass, aluminum, and painted surfaces

30-Minute Water-Ready: Exposure to water possible in as little as 30 minutes with bead size maximum of 3/16", temperature minimum 65° F, and humidity minimum 50 percent. Otherwise, caulk should not be exposed to water for eight hours. Do not touch or clean caulk for 24 hours.

10-Year Mold-Free Product Protection: Cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of the cured sealant is required however, as soap or other residue can cause secondary mold and mildew growth. Do not touch for 24 hours.


For additional information, including specific terms of the Limited Lifetime Guarantee, see product label.
 

  1. Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed.  Use backer rod for gaps larger than 1/2" x 1/2". 
  2. Cut nozzle to obtain desired bead size.
  3. PIERCE INNER FOIL SEAL.
  4. Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
  5. Wipe hands & tools thoroughly before washing.
  6. Allow 30 minutes before exposing sealant to water.
TT-S-00230C; TT-S-001543A/ASTM C-920, Type-S, NS, Class 25, use NT, M, G, A & O test requirements. 

Projects & How-To’s

Get step-by-step instructions and installation videos