All Projects Paintable Window & Door sealant is paintable and water-ready in as little as 30 minutes. It combines the superior performance of 100% silicone with the paintability of acrylic. This sealant will not shrink, crack, break down or wash away. It also offers 7 year mold-free product protection.
Adheres to: Most wood, glass, metal. vinyl siding, masonry, brick/stone, ceramic tile, plastic, and fiberglass
Typical uses: Windows, doors, siding, trim, molding, baseboards, vents, behind sinks, around showers, and for other painting applications
30-Minute Rain-Ready: Exposure to water possible in as little as 30-min with bead size max of 3/16", temperature minimum of 65° F, and humidity minimum 50 percent. Otherwise, sealant should not be exposed to water for eight hours. Do not touch for 24 hours unless applying paint.
30-Minute Paint-Ready: Sealant can be spray-painted immediately and brush- and roller-painted in as little as 30 minutes with bead size max 3/16", temperature minimum of 65°F, and humidity minimum 50 percent. Otherwise, sealant should not be painted for 30-minutes. Apply paint with reduced applicator pressure to avoid disturbing the sealant . Paintable Silicone Sealant works well with most water-based acrylic paints. Sealant is not recommended with oil-based paints. If oil-based paints are used, test apply an acrylic primer and paint in a small, inconspicuous area.
7-YEAR MOLD-FREE PRODUCT PROTECTION: Cured sealant is resistant to stain causing mold and mildew. Regular cleaning of the cured sealant is required, however, as soap and other residue can cause secondary mold and mildew growth.
For additional information, including specific terms of the Lifetime Guarantee, see product label
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2" x 1/2".
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
TT-S-00230C, TT-S-001543A/ASTM C-920, Type-S, NS, Class 25, use NT, M, G, A & O test requirements.