GE Max* Shield Painter's Advanced Polymer Acrylic Latex Sealant



  • Tri Shield Protection
  • Best-in-class performance with over 600% stretch
  • Paintable and 100% waterproof with mold-free product protection
  • 60-year durability guarantee


GE MAX Shield Painter Advanced Polymer Acrylic Latex is a premium sealant ideal for the most demanding paint projects inside and out. Formulated with Tri Shield protection, this sealant is 100% waterproof, and offers exceptional flexibility, excellent adhesion to a wide variety of building materials, and lifetime mold-free product protection. Max Shield sealant can span up to 2-inch gaps with over 600% stretch and 25% joint movement. This paint-friendly sealant is low in odor, guns out effortlessly, tools smoothly, and cleans-up easily with soap and water. The durable seal resists cracking, chalking, and crumbling in all seasons, and isguaranteed for sixty years.

Adheres To: Common building materials including most metals and woods, aluminum, composites, brick, stone, stucco, masonry, cement board, glass, porcelain, ceramic tile, drywall, plaster, vinyl siding, PVC,  fiberglass, and painted surfaces.

Best-In-Class Performance: Based on comparison of publicly available manufacturers’ specifications, product meets or exceeds the flexibility performance of any ASTM C-920, Class 25 or lower commercial Paint Projects siliconized acrylic sealant.

Stretches over 600%: Based on ASTM C-920, TYPE-S, NS, CLASS 25 analysis, product can span gaps of up to 2-inches wide and ½ inch deep with over 600% stretch and 25% joint movement.

Mold-Free: Fully cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of sealant is required, as soap and other residue may cause secondary mold and mildew growth.

Paint-Friendly: Formulation offers reduced dirt pick-up and resistance to cracking. Compatible with most latex and oil based paints.

Limited 60 Year Durability Guarantee: Manufacturer warrants that this product, when handled and used as directed, will meet the above specifications for sixty years. If not satisfied, return proof of purchase for refund. This is the sole and exclusive remedy and Manufacturer shall not be liable for any damages in excess of the purchase price.

For additional information, see product label.

  1. Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed.  Use backer rod for gaps larger than 1/2" x 1/2". 
  2. Cut nozzle to obtain desired bead size.
  3. Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
  4. Smooth or “tool” the caulk into gap within 3-5 minutes.
  5. Clean-up with a damp, disposable cloth; do not rinse.
  6. Protect from moisture for at least 24 hours for proper drying.
Exceeds ASTM C-920, Type-S, NS, Class 25 Use NT, G, A, M & O test and Federal Spec TT-S-00230C, Type II, Class A requirements. Exceeds C834, Type-OP, NS Grade -18°C test requirements.

Projects & How-To’s

Get step-by-step instructions and installation videos