• Home
  • GE Paintable Silicone Supreme Kitchen & Bath Sealant

GE Paintable Silicone Supreme Kitchen & Bath Sealant

summary

  • 30-minute paint-ready, spray paint immediately  
  • Water-ready in as little as 30 minutes
  • 10 year mold-free product protection
  • Permanently waterproof, will not shrink, crack, or break down over time

colors

Paintable Silicone Supreme Kitchen & Bath is a 100% waterproof sealant that is formulated for sealing around sinks, tub, showers, fixtures, countertops, backsplashes, and plumbing projects. Paintable and water-ready in as little as 30 minutes, this sealant offers mold-free product protection to help keep the cured sealant mold and mildew free for up to 10 years. 

Typical Uses: Showers, tubs, sinks, tile, countertops, fixtures, and painting applications

Adheres To: Most ceramic tile, laminate, porcelain, glass, metal, plastic, marble, granite, fiberglass, and wood

30-minutes water-ready: Exposure to water possible in as little as 30 minutes with maximum bead size of 3/16", temperature minimum 65°F, minimum humidity 50 percent. Otherwise, sealant should not be exposed to water for eight hours. Do not touch for 24 hours, unless applying paint (see below).

10-year mold-free product protection: Cured sealant is resistant to stain causing mold and mildew. Regular cleaning of the cured sealant is required, however, as soap and other residue can cause secondary mold and mildew growth.

30-minute paint-ready:  Sealant can be spray painted immediately, or brush painted and roller painted in as little as 30 minutes with maximum bead size of 3/16", temperature minimum 65°F, minimum humidity 50 percent. Otherwise, sealant should not be painted for three hours. Apply paint with reduced applicator pressure to avoid disturbing the sealant. Supreme Paintable Silicone works well with most water-based acrylic paints. Sealant is  not recommended with oil-based paints. If oil-based paints are used, first test apply an acrylic primerand paint in a small, inconspicuous area.
 

For additional information, including specific terms of the Lifetime Guarantee, see product label

  1. Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed.  Use backer rod for gaps larger than 1/2" x 1/2".
  2. Cut nozzle to obtain desired bead size.
  3. PIERCE INNER FOIL SEAL.
  4. Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
  5. Wipe hands & tools thoroughly before washing.
  6. Allow 30 minutes before exposing sealant to water.
TT-S-00230C, TT-S-001543A/ASTM C-920, Type-S, NS, Class 25

Projects & How-To’s

Get step-by-step instructions and installation videos