• Home
  • GE Ultra Seal Pro Siliconized Acrylic Latex Caulk

GE Ultra Seal Pro Siliconized Acrylic Latex Caulk


  • Paint- friendly
  • Excellent resistance to mold & mildew growth with Bio Seal Mold Control
  • Strong adhesion, flexibility, and durability


GE-branded Ultra Seal Pro Siliconized Acrylic Latex is an advanced grade caulk ideal for decorative and paintable kitchen and bathroom projects. Formulated with Bio Seal Antimicrobial Mold-Control, this cured sealant is resistant to odor and stain-causing mold and mildew growth.
Ultra Seal Pro caulk offers durable flexibility and excellent adhesion to a wide variety of household materials. It guns out effortlessly, tools smoothly, and cleans-up easily with soap and water. This low odor and paint-friendly caulk resists cracking with most latex and oil paints. Ultra Seal Pro caulk creates cured seals that are durable to withstand frequent cleanings, and retain their original fresh look for long-lasting, professional results.

Adheres To: Common kitchen and bath materials including most metals, plastics and woods, glass, drywall, plaster, granite, cultured marble, ceramic and porcelain tile, natural stone, cement board, composites, formica, fiberglass, aluminum, and painted surfaces.

Excellent Resistance To Mold & Mildew Growth: Formulated with long-lasting Bio Seal Antimicrobial Product Protection. Cured caulk is resistant to odor and stain causing mold and mildew, and will not wash off or wear away. Regular cleaning of cured caulk is required, however, as soap and other residue may cause secondary mold and mildew growth.

Paint-Friendly: Formulation offers reduced dirt pick-up. When painted over, caulk will not cause cracking or fading for most paint.

Limited Lifetime Guarantee: Manufacturer warrants that this product, when handled and used as directed, will meet the above specifications for as long as you own your home. If not satisfied, return proof of purchase for refund. This is the sole and exclusive remedy and Manufacturer shall not be liable for any damages in excess of the purchase price.

For additional information, see product label.

  1. Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed.  Use backer rod for gaps larger than 1/2" x 1/2". 
  2. Cut nozzle to obtain desired bead size.
  3. Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
  4. Smooth or “tool” the caulk into gap within 3-5 minutes.
  5. Clean-up with a damp, disposable cloth; do not rinse.
  6. Protect from moisture for at least 24 hours for proper drying.
Exceeds ASTM C-834 Type-OP, NS, Grade -18°C test requirements.

Projects & How-To’s

Get step-by-step instructions and installation videos